- What is the longest curtain rod available?
- How do you extend a curtain rod from the wall?
- What can I use instead of curtain rods?
- Can Command hooks hold curtain rods?
- How can I make a cheap curtain rod?
- How do you hang a curtain rod without drilling?
- Can you put 2 tension rods together?
- How long can curtain rods go without support?
- How far should a curtain rod extend past window?
- Do curtain rods need to be hang on studs?
- How high should I hang my curtains?
- Can you use Command Strips for curtain rods?
What is the longest curtain rod available?
Standard curtain rods are generally available in the following size ranges: 28-48 inches, 48-84 inches and 66-120 inches.
Extra-long curtain rods, on the other hand, span greater than 120 inches..
How do you extend a curtain rod from the wall?
Place the brackets into position on the wall, lining up the screw holes on the brackets with the pilot holes on the wall. Screw the brackets to the wall with the provided screws. Install the curtains onto the rod and attach the rod to the brackets. Adjust curtains as necessary.
What can I use instead of curtain rods?
An old piece of fence or a coatrack that you don’t use any longer is a great way to create your own DIY curtain rod. Just take a section of fence or rack and hang a few hooks on it to hold your curtains. This is a great rustic décor idea and a really cheap one, too.
Can Command hooks hold curtain rods?
Curtains are a great way to add charm to any home. … Many landlords don’t allow renters to drill holes into walls, which is necessary for installing curtain rod hooks. Fortunately, it is still possible to install curtain rods with Command hooks.
How can I make a cheap curtain rod?
Materials for DIY Curtain Rods1/2 inch Electrical Conduit – $2 for a 10 foot length.Corner braces – $3 for a pack of 4.1/2 inch One hole straps – $3 for a pack of 25.Nuts and bolts to attach the straps to the braces – $1.50 for a pack of 5.Spray primer (optional)Spray paint in desired color (optional)
How do you hang a curtain rod without drilling?
Coat Hooks To install them, intersperse the coat hooks at an even distance across the window. Loop the holes through each hook to hang your curtains. Coat hooks are easier to hang than traditional curtain rod hardware and don’t require drilling.
Can you put 2 tension rods together?
The In-Tension Rod Joiner allows you to combine multipe In-Tension rods for wider windows. One-year warranty.
How long can curtain rods go without support?
Over 96 inches, a third rod bracket is required as a center support; this is mandatory! Having said that, a 2 inch or 3-inch diameter pole can span a distance up to a full 12-feet without flexing or bowing using only two end brackets.
How far should a curtain rod extend past window?
When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side, which allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.
Do curtain rods need to be hang on studs?
If there IS NOT a stud, you will use a drywall anchor and a screw. The anchors are the white pieces in the below photo: Knowing which to use is very important — without a drywall anchor, a screw alone will not hold the weight of the curtain and rod. … If you do not have a stud finder, you can use a hammer and a nail.
How high should I hang my curtains?
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
Can you use Command Strips for curtain rods?
Great for installing curtain rods or hanging wall décor, coats, and bags! Use with rod diameter less than 5/8 in, length less than 48 in, and finial greater than 3/4 in.