Question: Is Thompsons Water Seal Any Good?

Should I use Thompson Water Seal on pressure treated wood?

Although treated wood is protected against decay and termite attack, the application of a water-repellent sealer to all exposed wood surfaces is recommended upon completion of construction.

This sealer will help control surface checking (splitting or cracking) and provide an attractive appearance..

What is the best way to waterproof wood?

There are three surefire ways to waterproof your wood for years to come.Use linseed or Tung oil to create a beautiful and protective hand-rubbed finish.Seal the wood with coating of polyurethane, varnish, or lacquer.Finish and waterproof wood simultaneously with a stain-sealant combo.

How do you remove Thompson’s Water Seal?

So here is the only recipe that worked for me…Remove the product with a real wood striper, i used “Super remover” this product can dissolve about anything, wear gloves and glasses. … Use a green abrasive pad with “Super remover” and scrub the surface.Sand the surface.More items…

What is the best water seal?

1. BEST OVERALL: SEAL-ONCE MARINE Penetrating Wood Sealer. SEAL-ONCE MARINE Penetrating Wood Sealer is a clear water-based sealer, but it provides the protection you’d expect from an oil-based stain, penetrating right down into the wood fibers for long-lasting protection against moisture damage and mold growth.

How many coats does Thompson’s Water Seal have?

Thompson’s WaterSeal Waterproofing Stains. Application: Only one coat is recommended for both Semi –Transparent & Solid. A second coat can be added if more color is desired. Allow the first coat to dry (approximately 2 hours) before second application.

Do you need to seal treated wood?

However, most pressure-treated wood should have periodic sealing against moisture, preferably every year or so. Although the wood is resistant to rot and insect attacks because of the pressure treatment, it can warp, split and develop mildew if not protected from the effects of water.

How often should I apply Thompson’s Water Seal?

every one to three yearsApplying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure. All Thompson’s WaterSeal products are DIY-friendly, and most need only a single application on a clean, dry deck.

Can you use a roller to apply Thompson’s Water Seal?

Even if you don’t want to buy a garden sprayer, you can still use plenty of other tools. Paint rollers, paint pads, and brushes should still work just fine when you apply Thompson’s water seal.

What is the best way to apply deck sealer?

Apply the deck sealer with a natural bristle brush. A roller is faster, but brushing helps force the sealer into open pores and grain. Make sure to get the sealer into joints where two boards butt together. Apply the deck sealer to three or four boards at once, working their entire length.

What happens if it rains after applying Thompson’s Water Seal?

Rain will damage the finish of any wet sealer with linseed oil or mineral oil in it. Because it forms a coating, it takes several hours to “set up” (dry) and during that time the sealer is vulnerable.

What is the difference between concrete sealer and Waterproofer?

One of the differences between a concrete sealer and a concrete waterproofer (sometimes called penetrating sealer) is that a sealer will form a protective layer over the surface while a waterproofer will penetrate down into the pours of the concrete and the protective layer will form there.

Is Thompson’s Water Seal toxic?

Will not harm fish, pets, livestock, plants or people when applied according to the label recommendations. Penetrates surfaces up to 3/8” depending on porosity. Seal-Once does not leach out or become hydrolytically unstable, therefore, it is safe to use over water.

What is the best sealant for outdoor furniture?

epoxy sealerAn epoxy sealer with exterior varnish topcoats is the most durable, but also the most labor-intensive finish you can apply to outdoor furniture.

Is Thompson’s Water Seal any good?

5.0 out of 5 stars Love Thompson’s Water Seal with the harvest gold color! Basically, it takes your weather worn fence and restores it back to almost new looking boards, plus protecting it from the elements. I used my spray gun to apply, and a little goes a long way. Obviously, you can use a brush to apply it as well.

How many years does Thompson’s Water Seal last?

10 yearsIf applied correctly, Water Seal will last up to 10 years.

Does Thompson Water Seal darken wood?

If it beads, rolls off or stands on the surface, but does not darken the surface, it is protected. Thompson’s® WaterSeal® Waterproofers and Exterior Stains penetrate the wood so that even after the beading is gone, the waterproofing protection lasts.

What’s the best way to apply Thompson’s Water Seal?

Apply by brush, roller, dipping, or sprayer. A garden “pump-up” style sprayer is the simplest method. If over applied, remove excess before it dries by redistributing to dry areas or wiping off.

Is it better to stain or seal a deck?

Many deck companies recommend using a combination stain/sealer product, which is basically a sealer with pigment added. The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.

What temperature do you apply Thompson’s Water Seal?

Be sure that both surface and air temperatures are above 50°F during application and remain above 40°F for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application.