Quick Answer: How Far Behind Drywall Are Wires?

Is it safe to put TV wires behind wall?

A power outlet extension with building-safe wire: Under no circumstances should you be running the power cables to your TV behind the wall.

These aren’t up to code and they’re fire hazards to boot.

The only power cable you should run behind your wall are ones that come in a code-friendly kit..

What can I use to cover exposed wires?

Run fish tape through the conduit tube from the inside of the home to the other end. Attach the wire to the fish tape, then pull it through the conduit to the breaker box side. This should cover the entire wire with the conduit in the process. Reattach the wire to the breaker box.

Can I drill above a plug socket?

Don’t drill directly above or below light switches and plug sockets. Invest in a stud finder/metal detector (as mentioned above) that will detect wires and pipes. If you do mistakenly drill into a water pipe, think of the little boy with his thumb in the dyke and LEAVE THE DRILL BIT IN THERE.

How do you tell if you’re drilling into a stud?

There are many ways of finding studs, some more accurate than others;Tap the wall. In a quiet room the tap sound will be different over each stud.Use a magnetic nail head finder. Locating a vertical line of nails is reassuring that they have been nailed into a stud. … Use a stud finder.

What do you put under a wall mounted TV?

If you don’t want to go all in with a piece of furniture but still want something beneath (or around) TV, floating shelves are a great option. They help pull your TV into the overall design of the room – helping eliminate the “black box effect,” and they provide a lot of flexibility as well.

What happens if I drill into a wire?

You drill into one conductor, almost severing it but not quite. Everything is fine until the cable is left carrying power near its rated capacity for an extended period, at which point the weak point gets hot. It might melt and cut the power, or if you are unlucky it arcs and sets fire to something.

How do you prevent wires from drilling into walls?

“One common rule is to avoid drilling around light switches and sockets, as the electrical wires can go horizontally and vertically around these fixtures,” Williams explains. “You can also get an idea of where wires and pipes run by looking in the attic and basement to see where they go up or down through framing.”

How do you mount a TV on the wall without wires showing?

To hide your cords, all you have to do is cut two holes in your sheetrock and drop them through the wall. It’s really easy as pie. Start by cutting your top hole. Cut it inside the bracket area to make sure it’s well hidden once your TV is mounted.

Do stud finders detect wires?

Using an electronic stud finder, you can detect live wires behind the walls or through the studs. An electronic stud finder is a tool that will let you find studs, beams, joists, or wires.

Is it OK to hang a TV above a fireplace?

Now, if you never actually use your fireplace, then you’re fine. Otherwise, be wary. Though stylish, mounting a TV above a fireplace isn’t the best idea for the you or for the TV. Placement is a big issue, and location and TV height can be significant factors when it comes to picture quality.

Can a nicked wire cause a fire?

Factors such as nicked wires, loose connections, improper wire size, reversed polarity (hot and neutral wires connected to the wrong terminals) and poor or no grounding of metal parts of electrical equipment can cause fires, shock and electrocution.

Can you rewire a house without removing drywall?

The answer is usually yes, and even a whole house rewiring can in some cases be done with minimum disruption. If you want to know more details about the process, a good electrician should be able to walk you through how to rewire a house without removing drywall.

Can you run electrical wire behind studs?

Yes, you can run the cable behind the studs. In these situations, you often see the electrician only drill a hole in every other stud and run behind the stud between. You can also afford to offset the drilled holes towards the back of the stud to get them even farther from possible damage from nails.

How do you tell if there are wires in a wall?

Move the stud finder over the electrical wires. On metered finders, when they are exactly over the wire, the meter will read 120 volts, or 220 if you are in the vicinity of stove wires. A stud finder that uses a light band will show all the lights becoming illuminated when the stud finder is directly over the wire.

Where do the wires go on a wall mounted TV?

The outlet power is attached to a plastic tube that you place behind the wall via two holes that you drill into the wall behind the TV(one hole low on the wall, the other higher on the wall behind the TV). Your TV cords run through the plastic tube. The top outlet has a power plug. This is where you plug in the TV.