Where Do The Red And Black Wires Go On A Light Switch?

Why do I have 3 red wires in my light switch?

The third red wire goes into one of the two terminals along with one of the other reds.

The third red is the feed to the next lights in the circuit, in your case the bathroom.

It will have been in one of the terminals on the old switch along with the live feed (one of the reds) from the last light in the circuit..

What do you do if you don’t have a red wire?

If it is in a circuit that is wired as 240 volt in the panel it can be capped and taped as said (and labeled) then the circuit could be used as a 110V however that leg (red hot wire) should be removed from the breaker in the panel, labeled and left there in case the 240V is needed again.

Can I leave the red wire unconnected?

Look for the other end of the red wire in the box that has the fan switch. It could be unconnected in the box. Someone may have planned ahead and provided a second wire for a switched light on the fan. Just leave it.

Is red wire live or neutral?

Black (neutral) Red (live) Green and yellow (earth)

Where does the red wire go on a light switch?

Attach the white wire from the light fixture, which is now the hot wire, to the nut at the top right of the switch. Attach the red wire from the light fixture to the nut at the top left of the switch. Connect the bare copper wire to the green nut at the bottom left of the switch.

What are the white black and red wires?

Black, red, white with black or red tape will always indicate a hot wire. The term “hot” means these wires carry a live current from your electric panel to the destination. … Black or red wires always carry power from the service panel (breaker box) to your home’s devices.

What happens if you wire a light switch backwards?

A light switch is a simple device with only two states, competing a circuit (On) or breaking a circuit (Off). It is a series control element is a series – parallel circuit design. A light switch has no polarization so when you reverse the connections on the light switch it works just as before you reversed the wires.

Which wire is live red or black?

The live wire is brown in new systems and red in old systems. The neutral wire is blue in new systems and black in old systems.

Does the red wire connect to black or white?

Connect the green wire to your household ground wire (copper/bare wire). Connect your white wires together and secure with wire nut. Connect the red wire in the ceiling to the black wire in the light kit and the black wire in the ceiling to the black wire in the fan.

Where do the black and white wires go on a light switch?

When you turn on a light switch, power goes to the light through the “hot” (black) wire and then back through the neutral (white) wire to the ground. The bare or green-wrapped ground wires serve as a backup to divert the power safely away in case of an electrical fault.

What do I do with the red wire when installing a light?

If the wire still is hot, the wire is a hot wire that delivers electrical power to the branch circuit. If turning the switch off turns the wire off, the red wire delivers power from the light switch. Note: Never touch wires or their connection points while the circuit is energized.

Why do I have a red wire in my light switch?

Red. Red electrical wire indicates the secondary live wires in a 220-volt circuit, used in some types of switch legs and in the interconnection between smoke detectors that are hard-wired into the power system. You can connect a red wire to another red wire or to a black wire.

Can black and red wires go together?

You can link two red wires together, or you can link a red wire to a black wire. Since red wires conduct current, they are considered hot.